Van Marcke GO MORENA, Инструкция по эксплуатации

Страница: 3 / 15

REGULATORY REFERENCES
shower cubicle complies with the following European requirements and regulations:
Reference Standard EN 14428:2015
Shower enclosures - Functional requirements and test methods
GENERAL SAFETY INSTRUCTIONS
Inspect the packaging for integrity. The packages contain fragile materials: handle with care and protect them from
impacts.
lack of experience or knowledge, unless they have been given, through the intermediary of a person responsible for
their safety, supervision or instruction concerning use of the appliance.
WARRANTY TERMS AND CONDITIONS
transposition provisions pursuant to European Directive 1999/44/CE
The warranty has duration of 2 (two) years . The warranty period stars of the date of purchase of the product (indicated in the
The warranty is limited to the territory of the EU.
The warranty is only valid upon submission of the proof of purchase.
Use of the warranty shall not extend its duration.
The warranty covers all defects attributable to the product, discovered during normal use.
The warranty is limited to the repair or replacement of the defective part with an identical part, or replacement of the product.
The costs of transportation, removal and/or relocation of the product will be paid only if the actual existence of defects covered
by this warranty is established.
The warranty shall be void unless the operating conditions recommended in this manual are complied with.
The warranty does not cover any defects/failures/malfunctions resulting from:
•
Damage due to transport
•
•
•
Incorrect sealing/silicone sealing, or use of poor-quality products
• Clogging or blocking due to deposits, calcium scaling, sand, metal debris or impurities in the water
• Leaks due to gaskets damaged during installation, not lubricated, or worn
• Scratches, dents or cracks caused by incorrect handling or accidental impacts
• Use of corrosive or abrasive cleaning products
• Products deteriorated by frost
• Lack of maintenance, or inadequate maintenance, or non-compliance with the attached “cleaning and maintenance”
recommendations
• Repairs done by unauthorized/unskilled personnel
CLEANING AND MAINTENANCE
Use special products for glass when cleaning glass surface.
Use generic non-aggressive products when cleaning acrylic and aluminium parts.
Only use a damp cloth or sponge to clean chrome-plated surfaces.
DO NOT use abrasive cloths or sponges, powder detergents, or detergents containing alcohol, ammonia, acids, acetone, or
solvents.
CLAIMS/RETURNS
No claims are accepted unless a proof of purchase is provided.
All claims will be processed and managed according to the internal procedures of our Customer Care Department.
The procedures applied to any repairs, credit notes or replacements shall be agreed subsequently to and based on the results of
the checks conducted by our Customer Care Department.
3