1
Loosely secure the fixing plate to the top of the bulkhead in the position shown
below by bolting into the threaded inserts on the top bulkhead using M6x16 hex
bolts (FX4012) and M6 washers (FX4013).
Assemble the top, bottom and sides together outside of the vehicle as shown below
using M6x16 coach bolts (FX4042), M8 washers (FX4020) and M6 flange nuts
(FX4016). Ensure that the top overlaps the bottom and the sides overlap both.
2
3
Lift the bulkhead into the vehicle (two man lift) with the bottom return facing into the
load area.
4
Please read the important notes on page 1 before fitting this product. Do not
remove the drivers seat existing tubular frame, this frame stays in place and the
bulkhead has been designed to fit behind it.
TOP
BOTTOM
LOAD AREA
CAB AREA
DO NOT
REMOVE
IN8176 - PAGE 2 OF 3
