background image

VanGuard 1300 Series Compound Microscopes provide the 

necessary  specifications  for  diagnostic  and  educational 

use in medical/veterinary clinics, universities, and industrial 

laboratories.

 • 

Research Level

 • 

Brightfield & Phase Contrast Models

 • 

Infinity & Fixed Focal Length Models

 • 

Precision Optics

Viewing Head. 

 Binocular (Seidentopf), or trinocular (Seidentopf) 

heads rotate 360° and are inclined at 30°. All models feature 

interpupillary and dioptric adjustments. The trinocular head features 

a sliding main prism (80/20 split) to provide full-time imaging when 

the vertical tube is in use (80% of the image to the vertical tube 

and 20% to the eyetubes).

Eyepieces.

  10X extra-widefield (DIN), high eyepoint with a field 

number of 20.

Nosepiece.

  Quadruple, reversed, ball bearing nosepiece with 

high-grade lubricant and positive stops. The nosepiece is reversed 

(inward-facing) to allow for easier manipulation of slides and to aid 

in keeping the objectives clean.

Objectives.

  Choose from fixed focal length (achromatic) or infinity 

corrected (plan achromatic). Objectives are made to DIN standards 

and are anti-reflective coated.

Stage.

  Delivering a high level of fluid motion control and longevity, 

the stage measures 135x140mm. Features a removable spring-clip 

slide holder and a chemical resistant finish. Motion is controlled by 

a right-hand, low position coaxial control and is driven by a rack 

and pinion system.

Focusing Movement.

  Coaxial, ultra-low position, coarse and fine 

focus controls feature a 23mm focusing range and are graduated 

to 2 microns per division. Fitted with tension adjustment and safety 

up-stop.

Condenser.

    Brightfield  models  come  with  a  1.25  N.A. Abbe 

condenser. Phase contrast models come with a 1.25 N.A. Zernike 

condenser with phase annulus rings for 10X, 20X, 40X, and 100X; 

also  has  a  “0”  setting  for  brightfield  work. All  condensers  are 

mounted on a rack and pinion focusing mechanism and feature 

spring-loaded centering knobs and iris diaphragm.

Illumination.

  20W, 6V variable quartz halogen light source. 

Comes with blue, green (phase contrast only), and dispersion 

filters.  0.25A, 250V fuse.

Base.

  Stable 180 x 225mm fitted with anti-skid rubber feet.

Body.

  Cast metal, ergonomic body with stain-resistant enamel 

finish.

1300 Series Compound Microscopes 

Thank you for purchasing this VanGuard Microscope. With the user in mind, VanGuard Microscopes are built from modern 

designs and should provide a lifetime of reliable performance. We recommend you read this entire manual carefully before 

setting up and using the instrument.

Introduction

Table of Contents

2

Introduction

..........................................................  

2

Environmental Conditions

..................................  

3

Parts & Accessories

 

Included Parts........................................................  3

 

Microscope Diagrams..........................................  4-5

 

Optional Accessories.............................................  6

Setup

 

Assembly................................................................  7

 

Centering the Illuminator......................................  7 

 

Substage Adjustments............................................  8

 

Aligning the Phase Contrast Annulus Rings..........  9

Operation

 

Variable Lighting Control & Power Switch.............  10

 

Focusing & Mechanical Stage Mechanisms.........  10

 

Interpupillary & Diopter Adjustment.......................  11

 

Setting the Up-Stop Mechanism...........................  11

 

Using the Camera Port.........................................  12

 

Oil Immersion Objectives......................................  13

 

Using Filters..........................................................  13

Maintenance

 

Replacing the Lamp..............................................  14

 

Replacement Lamp Information............................  14

 

Replacing the Fuse...............................................  15

 

Replacement Fuse Information............................. 15

 

Caring for your VanGuard Microscope..................  15

Troubleshooting

............................................  

16-17

Warranty & Service Information

........................  

18

Specifications

....................................................  

19

See warranty card for more information:

www.veegee.com/pages/technical-support-service

Warranty information and a registration card can be found at the following web address:

www.veegee.com/pages/technical-support-service

Содержание 1320BR





















Отзывы: