Van Der Valk ValkTriple, Руководство по установке

Страница: 5 / 28

Panel: maximum dimensions 1800x1100 mm (21 kg) Panel: maximum dimensions 2100x1100 mm (24 kg)
Windmap Belgium
Required ballast | Belgium
General
The ValkTriple® mounting system must be reinforced by means of tiles, which must be placed on the
indicated ballast foundations. In
three steps you can easily calculate the required ballast;
• determine the wind area on the windmap
• choose the wind area and building height in the table
• you can now read the number of tiles / kg
Note 1: The extra ballast must be equally divided over the ballast foundations.
Note 2: The max. of 32 tiles can be placed for extra ballast (288 kg).
Building height
0 - 5
meter
5 - 7
meter
7 - 9
meter
9 - 12
meter
12 - 15
meter
23 m/s
11,0 45,0 71,0 103,0 128,0
kg
1,5 5,0 8,0 11,5 14,5 tiles
24 m/s
30,0 67,0 96,0 130,0 158,0 kg
3,5 7,5 11,0 14,5 18,0 tiles
25 m/s
50,0 90,0 121,0 158,0 188,0
kg
6,0 10,0 13,5 18,0 21,0 tiles
26 m/s
70,0 113,0 147,0 188,0 220,0 kg
8,0 13,0 16,5 21,0 24,5 tiles
Building height
0 - 5
meter
5 - 7
meter
7 - 9
meter
9 - 12
meter
12 - 15
meter
23 m/s
38,0 77,0 108,0 145,0 174,0
kg
4,5 9,0 12,0 16,5 19,5 tiles
24 m/s
60,0 103,0 136,0 176,0 209,0 kg
7,0 11,5 15,5 20,0 23,5 tiles
25 m/s
83,0 129,0 166,0 209,0 244,0
kg
9,5 14,5 18,5 23,5 27,5 tiles
26 m/s
106,0 157,0 196,0 244,0 281,0 kg
12,0 17,5 22,0 27,5 31,5 tiles
Environmental factors
Position Middle zone roof
Terrain category III (villages, suburban terrain, permanent forest)
Roofing materials Bitumen
X = the required ballast is higher than will fit under the system. The system must be mechanically attached to the roof. Please contact Van der Valk Solar Systems.
* If you use tiles of different sizes and thus another weight, you need to adjust the number of tiles to get the right weight.
Ballast foundations