VAN DER ENDE Enfan, Руководство пользователя

Страница: 8 / 32

Page 8 of 32
4 INSTALLATION
This chapter describes the installation of the Enfan. The separate parts must first be assembled into a
single unit, ready for suspension.
The Enfan can be attached using either short suspension brackets or long suspension brackets. An
overview is attached to help you.
4.1 Enfan parts
Quantity Description Type
Enfan model FG035
1 Ventilator FG035
1 Set suspension brackets for FG035 2x suspension brackets for FG035
2x rivet m8,
8x self-locking nuts m8,
4x bolts m8x20
2x bolts m8x12
14x washers m8
1x outflow grid for FG035
4x PA spacers 6.3x15.0x15.0 mm
4x bolt m6x40
12x washers m6
4x self-locking nuts m6
1x cable thermostatic switch
Enfan model ZN045
1 Ventilator ZN045 AC/EC
1 Set long suspension brackets 2x long suspension brackets
2x rivet m8
8x self-locking nuts m8
2x bolts m8x20
2x bolts m8x12 en
10x Washers m8
1 Set short suspension brackets 1x short suspension brackets
1x rivet m8
8x self-locking nuts m8
4x bolts m8x20
10x washers m8
Enfan model ZG045
1 Ventilator ZG045 EC
1 Set long suspension brackets 2x long suspension brackets
2x rivet m8
8x self-locking nuts m8
4x bolts m8x20
2x bolts m8x12
14x washers m8
1 Set short suspension brackets 1x short suspension brackets
1x rivet m8
8x self-locking nuts m8
4x bolts m8x20
10x washers m8
Table 2 Enfan parts
There will be delivered one set of suspension brackets at every Enfan
model. Table 2 shows all the
different possible suspensions at every Enfan model.