ROOFTOP DECK - TRANSIT
page | 18
Installation questions? Email
INSTALLATION STEP
With a 5mm allen wrench, tighten down
outside corner bracket screws onto sides
and front/rear sections
Next tighten down the inside corner
bracket, and last the two screws with nuts
holding the corner bracket together
With the corners and front and rear
sections installed, sight down the rails to
make sure it’s all straight
Move around the van and tighten all the
risers down
There’s enough adjustment in the system
to enable the rails to be square and in-line
with each other
*Throw a tape measure across the rails,
should be 59-7/8” - 60” outside-outside
*If you’re installing planks, install them be-
fore you tighten down the risers to the roof,
this will help set the width
11
