![background image](http://html1.mh-extra.com/html/vamp/259/259_operation-and-configuration-instructions_3320118040.webp)
3 VAMPSET PC software
Operation and configuration
40
VAMP 24h support phone +358 (0)20 753 3264
VM259EN007
3.
VAMPSET PC software
The PC user interface can be used for:
On-site parameterization of the relay
Loading relay software from a computer
Reading measured values, registered values and events to a
computer.
Continuous monitoring of all values and events.
Two RS 232 serial ports are available for connecting a local PC
with VAMPSET to the relay; one on the front panel and one on
the rear panel of the relay. These two serial ports are connected
in parallel. However, if the connection cables are connected to
both ports, only the port on the front panel will be active. To
connect a PC to a serial port, use a connection cable of type VX
003-3.
The VAMPSET program can also use TCP/IP LAN connection.
Optional hardware is required.
There is a free of charge PC program called VAMPSET
available for configuration and setting of VAMP relays. Please
download the latest VAMPSET.exe from our web page
www.vamp.fi. For more information about the VAMPSET
software, please refer to the user’s manual with the code
VMV.EN0xx. Also the VAMPSET user’s manual is available at
our web site.