ValveTrain Amplification
Page 5
ValveTrain Trenton
Back Panel Features
2 AMP 120V
1 AMP 240V
500 mA
High Voltage
Send
Return
Loop
WARNING - NO USER SERVICEABLE ITEMS INSIDE Refer all service to a qualified technician. Amplifie
r Voltages can KILL!!
!
LOW
POWER
8 ohm
4 ohm
Speaker
The Low Power switch, the speaker jacks and the jacks for the Passive effect loop switch are on the back
panel.
1. The LOW POWER switch allows you to change the overall output level of the
Trenton from approximately 16 watts down to 6 watts.
2. The SEND jack for the effects loop allows the preamp signal to be sent to
outboard effects processors or to slave amps. Using this jack does not interrupt
the signal going to the internal power amp.
3. The RETURN jack disconnects the preamp signal from the internal power amp.
This jack can be used to take the output signal from outboard effects processors or
may be used as a discrete power amplifier input (bypassing the preamp
completely)
That’s about it…