Valuxhome Luxey42, Важные инструкции и руководство по эксплуатации

Страница: 8 / 12

Step Two
Make sure the area to be drilled does not have any hidden electrical wires or water and gas
pipes.
The wall
fi
xings provided is for concrete walls only; please use suitable
fi
xings for your wall type.
If in doubt, contact a quali
fi
ed hardware expert.
Place the three bulged screw tubes into the drilled holes and then screw in the self-tapping
screws. Screw the extended wooden screws into the 0.20” screw anchors so they protrude out
of the wall to angle the
fi
replace. Make sure that the screws are secured in place.
Have 2 people li
�
the
fi
replace and hook it onto the mounted bracket.
Check the
fi
replace for stability to see if it is securely mounted.
Instructions for Use
This
fi
replace can be operated either by the switches located on the right side panel of the
fi
replace or the supplied remote control.
Turning On
Plug the
fi
replace into a power outlet.
Turn on the power switch which is located on the right side of the
fi
replace.