STEP 2:
How to setup the phone numbers?
In case the alarm gets triggered, the system can send to up to 5 phone numbers an alarm
notification by sending a SMS or giving a call.
Note:
do not forget to insert a SIM Card in the port located on the backside of the panel. The
SIM Card does need internet/data service, only SMS and calls should be activated.
Where can I find a suitable SIM card for my alarm system?
In order to have a fully functional system you will need a SIM card, you can get a standard SIM
card at the same shop where you bought your mobile phone or you can buy one online, it can
be from any cellular provider. 4G, 3G, 2G, GPRS and GSM SIM cards are compatible.
Once you have it, just insert the SIM card in the back side of the main host to enable the system
to send notifications to your mobile phone.
Please follow the next steps to setup the phone numbers:
1.
Press: “
ENT
”.
2.
Enter Code: “
888888
” (this is the default password).
3.
Select: “
Auto Dialer#’s
” use the arrows
to find the option in the menu.
4.
Press: “
ENT
”.
5.
You will see: “
1: Call Center”
this will be the mobile number of the alarm system’s manager
(usually your phone number).
6.
Delete the old record by pressing the arrow
.
7.
Enter the phone number. Example: 6502097930
8.
Press: “
ENT
”.
9.
Use the arrows
to select notification mode: “
Call by phone” or “SMS Reporting”.
“Call by phone”:
when the alarm is triggered you will receive a call and you will listen to the
voice message you previously recorded.
“SMS Reporting”:
when the alarm is triggered you will receive a SMS to your mobile phone
informing the alarm has been triggered and what sensor has sent the alarm notification.
10.
Press: “
ENT
”
