5.0 OPERATION
Operation Procedure
1.
Plug the USB car charger into the car cigarette lighter, and the LED
light turns blue.
2.
Plug the USB connector of the USB cable into the car charger's
output interface. Then plug the other end of the USB cable into the
electronic equipment (such as mobile phone, MP3, camera).
3.
Please pull the the car charger out after the electronic equipment
is charged.
Operation Notes
1.
Please plug the car charger after starting the car.
2.
Please pull the car charger out after use or car flameout.
3.
Do not use the car charger with electronic products which own
over-charging specifications, to avoid any problems caused by
specification mismatching.
4.
The car charger will get a little bit warm when used, and it's a
normal phenomenon that the temperature is less than 65 degrees
Celsius under normal room temperature.
5.
When the car charger stops working under over-current,
over-temperature or short-circuit protection, please unplug the
device. After it automatically returns to work, you need to check
whether the device is compatible with this charger.
6.
Do not let the
car charger close to fire, such as stoves, candles etc.
7.
Do not let the car charger get in contact with liquids, such as in or
near swimming pools, bathtubs, etc.
8.
Do not wash the car charger with corrosive cleaner.
9.
If the car charger cannot work properly, please contact your
vendor.