4
1. Specification
Interface USB
2.0
Model
SPIO 352
Transfer Rate
480Mbps
Hard Disk
3.5”, IDE Hard Disk
Dimension
196mm x 150mm x 35mm (D x W x H)
Weight
1.2Kg (Including HDD)
Windows
98 / 98SE / ME / 2000 / XP
OS
Mac
OS 8.6 higher
2. System Environment
[ Windows PC ]
USB 2.0 / 1.1
-
System : Pentium or higher IBM compatible PC or Mac
-
Memory : Over 32MB
-
OS : Windows 98 / ME / 2000 / XP, Mac OS 8.6 & higher
-
Interface : USB2.0 / 1.1 port (For USB2.0 support, USB2.0 based main board or USB 2.0 PCI card, or PCMCIA
cards are required)
-
CD Drive for driver installation or internet connection for download of installation driver
[ Macintosh ]
USB 2.0/1.1
-
System : PC that has USB port
-
Memory : Over 32MB
-
OS : Mac OS 8.6 & higher
-
CD Drive for driver installation or internet connection for download of installation driver
3.
Installation
1) Hardware installation
1.Prepare the SPIO 352 and HDD(3.5” IDE type for general computer).
2.Push down the hook, pull the slide bar, and open the case.
3.Connect the 40pin IDE cable of PCB and 4pin of power cable each to the 40pin IDE
connector of HDD and 4pin power connector. You have to make sure that the red lines of 40pin
ribbon cable have to be No.1 pin.
4.Close the cover and slide the bar to lock the case.
5.Now, the hardware installation is finished.
