Value Hobby Sbach-342 EPP 3D Profile, Инструкция по эксплуатации

Страница: 10 / 13

www.valuehobby.com/valuehobby-sbach342-epp-foamie.html
10
Step3. Install two keeps to the two ends of the aileron
pushrod (NO.12 Φ1.5 x 169mm).
Step4. Use the foam safe CA to install the control
horn to the aileron. Center the aileron and use the
pushrod to connect the servo arm and the control
horn.
Section 5: Elevator and Rudder Servo
Installation
Step1. Install the elevator servo mount to the
fuselage using foam safe CA as shown.
Step2. Install a 9g servo to the mount using two
self-tapping screws. (Electronically center the servo.)
Step3. Locate the pushrod support and slide the
support onto the pushrod as shown.