Value Hobby Cap 35 Скачать руководство пользователя страница 3

Dear Customer, 

 
Congratulations on your purchase of a 35in Series Electric Profile from Value Hobby. We thank you for your generous support, 
and hope you enjoy your new airplane. 
 
At Value Hobby, we want to offer competitive prices, good performance, and products that you can setup and use with ease. 
That’s why we extensively researched and tested this airplane, and suggested all the products necessary for you to setup properly. 
We understand that you have many choices when purchasing, and we are grateful you choose to buy from us. 
 
As vendors, one of the most gratifying things for us is to hear from our customers. We would welcome any suggestion to help us 
improve. Please make us aware of any errors and imperfections in the airplane or the instructions, or about the setup that we 
suggested. We hope you’ll find our setup suggestions to be helpful, and enjoy flying your new airplane. Please feel free to 
contact us at (630) 948-0947 or email us at [email protected] 
 

Disclaimer 

 
By purchasing and/or building this model, user assumes ALL liability and risk involved with this product. This model should be 
built and flown by an experienced pilot and only flown at AMA sanctioned sites. 
 
Value Hobby guarantees this model to be free of defects in materials and workmanship at the date of purchase. This warranty 
does not cover any parts damaged by use or modifications. In no way shall Value Hobby’s liability exceed the original cost of the 
purchased model. Further, 
Value Hobby reserves the right to modify this warranty without notice. Value Hobby has no control over the final stages of 
assembly or the material used for the final assembly. No liability shall be assumed nor materials used for the final 
user-assembled product. By the act of using the final product the user accepts all resulting liability. Value Hobby, as a R/C 
product vendor, provides a top quality airplane and instructions to complete the model. The quality and flight characteristics of 
the finished model depends greatly on how it is built; we cannot guarantee the performance  for the completed model and 
representations are expressed or implied as to the performance of the completed model. If the buyer is not prepared to accept the 
liability associated with the use of this product, the buyer is advised to return this kit immediately, in new and unused condition. 

 
Safety in Assembly

 

During assembly of this aircraft, you will be asked to use sharp knives and hobby adhesives. Please follow all safety procedures 
recommended by the manufacturers of the products you use, and always follow these important guidelines: 

ALWAYS protect your eyes when working with adhesives, knives, or tools, especially power tools. Safety glasses are the best 
way to protect your eyes. 

ALWAYS protect your body, especially your hands and fingers when using adhesives, knives, or tools, especially power tools. 
Do not cut toward exposed skin with hobby knives. Do not place hobby knives on tables or benches where they can roll off or be 
knocked off. 

ALWAYS have a first-aid kit handy when working with adhesives, knives, or tools, especially power tools. 

ALWAYS keep hobby equipment and supplies out of the reach of children. 

Safety in Flying

 

This is NOT a toy! It is a very high-performance RC airplane capable of high speeds and extreme maneuvers. It should only be 
operated by a competent pilot in a safe area with proper supervision. 

ONLY fly your aircraft in a safe, open area, away from spectators and vehicles–and where it is legal to fly. 

NEVER fly over an unsafe area, such as a road or street. 

Содержание Cap 35
















Отзывы: