1.5 Start-up
1.5.1 Prior to start-up
DANGER:
Operation of the engine Exhaust gases can cause asphyxia. Only operate the engine with
the tractor in a ventilated area, i.e., never in a closed environment
Before putting the engine into operation, refer to the servicing table and check the items listed in servicing
every 10 hours or daily.
Proceed as follows:
(1)
Examine all systems in search of possible
leaks.
(2)
Check the level of brake fluid.
(3)
Check the water level in the engine cooling
system.
(4)
Check the condition and tension of the fan
belts and the compressor belts.
(5)
Check the engine oil level.
(6)
Check the amount of fuel in the tanks.
Fig. 9
(7)
Check the tightness of wheel lug nuts, the
correct attachment of hose clamps, fittings,
electrical connections and operation of the
instrument panel.
(8)
Check that all tractor systems are suitable for
the work to be performed. For example:
Power take-off shaft (if it is type 1000/540),
height and length of the draw bar, remote
control, etc.
(9)
In addition to the adjustments on the tractor,
you should know how to make the
adjustments of the implement to be used.
For these adjustments, you should refer to
the Manual for the use of the implement.
Fig. 10
Always fill the tractor fuel tank(s) after each day of work. Keeping the tank full prevents air from
condensing inside of it overnight and transforming into water, which mixed with the fuel is highly
damaging to the injection system.
NOTE:
If the tractor has remained stationary for a long period, bleeding the fuel system is recommended.
Engage the manual pump to drain water and impurities from the fuel system.
1.5.2 How to mount and dismount the machine safely
NOTE:
Do not use the control levers as a handgrip and never step on the pedal controls when mounting or
dismounting the machine.
NOTE:
Do not attempt to mount or dismount when the tractor is in motion.
NOTE:
Do not jump off the tractor unless it is an emergency.
1. Safety
20
Series BM
87659000
