
Performing the temperature control knob accuracy check
• Turn on the water and direct to the handshower
• Turn the temperature control knob to the 12
O-Clock position.
• Using a temperature test meter or similar
testing device (not included), check to make
sure the temperature recorded for the
handshower water output does not exceed
100.4 F.
Please adjust temperature according to the following steps below:
How to use the
Temperature Control Knob
•
Turning the handle clockwise makes the water
cooler;turning the handle counter-clockwise makes
the water warmer.
• When
the
safety
stop
override
is
at
the
12
:
00
position
,
the
output
water
is
100.4°F
,
the
handle
will
stop
.
•
If
a
user
wants
water
hotter
than
100.4°F
,
press
the
safety stop
override
button
and
continue
turning
the handle
counter
-
clockwise
.
• The maximum water temperature output should be
100.4 F.
• If the user wishes to re-set the maximum water
temperature default value, please call
1-888-919-6492.
Attention:
How to use the
Temperature Control Knob:
Additional Safety Measure:
After installing the shower panel, it is recommended that a test be performed to ensure
the actual water temperature (hot position) is consistent with the temperature setting on
the panel's thermostatic valve control.
English
100.4°F
OFF
9
Safety Stop
Override
Содержание VS2001
Страница 2: ...2 ...