Valore VS1002, Руководство по установке

Страница: 4 / 16

Pencil
Phillips Screwdriver
Wrenches
Hammer
Sealing Tape
Level Electric Drill
Recommended Tools for Installation:
24mm(15/16")
-
PH +
English
Attention:
• Please read this Installation and User Guide before operating.
• Always take extra care when installing to prevent injury. Please wear appropriate safety equipment.
• Do not allow children unsupervised use of the shower column.
• Do not use the shower column if you are physically impaired or under the influence of alcohol or any
substance which may prevent you from properly operating the shower column.
• Keep enough distance between yourself and the shower column.
• Do not allow sensitive parts of the body such as eyes to come too close to the shower jets.
• Proper pressure balance needs to be maintained between hot and cold water inputs to prevent
scalding or injury.
• Before and during installation,please read and familiarize yourself with all installation instructions
for this product.
• Please keep all components,parts and accessories of this product away from small children and
minors.During installation,all screws,tools and small parts should be supervised so that they do
not fall into the hands of children.
• Use caution at all times when installing this product.Please ensure that you are physically able to
perform all parts of the installation and that you have the correct tools and equipment needed.
• Before beginning,remove all wrappers and packinging materials including staples and packing
straps.
• Please check to ensure that all components and parts are complete.
• The Filter Gasket(Part # 13) must be installed to protect against incoming dirt by pipework.
Incoming dirt can impair the function and/or lead to damages on functional parts of the fixture.
Manufacturer will not be held liable for resulting damages.
• The O Ring Gasket (Part # 14) must be installed to prevent water leakage. Manufacturer will not
be responsible or liable from any damage which results directly or indirectly from failure to
installation of the O Ring Gasket.
Important Note for Installation:
4
6mm(15/64")
Drill Bit