①
Output 1: DC 5V/2.1A (max)
②
Micro USB input: 5V/2A (max)
③
Output 2: DC 5V/2.1A (max)
④
Wireless charging indicator
⑤
Multi-functional button
⑥
LED indicator
START USING THE WIRELESS POWER BANK
1) Charging the Power Bank (2.0A USB adapter to wall plug)
Connect your power bank to the USB adapter (2.0A) using the provided charging cable. One
of the LED bulbs would flash continuously to indicate that it is charging in progress.
Note: Fully charge the power bank for at least 8 hours before first use. This is to maximise the battery
performance and prolonging the life of lithium ion batteries. Recharge your power bank once every three
months when not in use or seldom used.
2) After being fully charged
After the power bank is fully charged, the LED light will turned off. Please disconnect the
cable from the power bank.
Note: If a short circuit occurs, the power bank will turn off automatically and enter into safety-protection mode.
3) Multi-funtional button
a) Power indicator display
Press the multi-functional button once to check the battery status of the power bank with LED
indication.
4 LED (solid): 76% - 100%
3 LED (solid): 51% - 75%
2 LED (solid): 26% - 50%
1 LED (solid): 1% - 25%
1 LED (flash): Low battery (requires charging)
Note: The percentage displayed is only an estimate; some deviation is expected.
4) Charging the mobile device (1.0A ~ 2.1A)
Connect your power bank to your mobile device (1.0A ~ 2.1A) using the provided charging
cable.
Note: The provided cable only charges your mobile devices with Micro USB functionality, not suitable for Apple
products. Eg, iPod, iPhone and iPad.
5) Charging the Qi-Compatible mobile device
Simply place your Qi-Compatible device on top of the power bank, it will start charging
automatically and the wireless charging indicator will lit.
Wireless charging device was given priority in charging followed by USB charging device.
