SYSTEM
This option Include Firm Version / Default Setting / Card info configuration.
• Default Settings
- The default setting option is used apply the Wi-Fi Action Camera’s
manufacturer default settings.
• Firm Version
- The version option is used to view the Wi-Fi Action Camera’s firmware.
• Card info
- The Card info option is used to view the information of the Memory card.
NOTE:
Update firmware:
1) To update your Wi-Fi Action Camera’s firmware, make sure you have the firmware file
downloaded and
pasted it into the root of the micro SD card on your PC.
2) Insert the micro SD card into your Wi-Fi Action Camera device.
3) Turn on the Wi-Fi Action Camera. The power light will turn on and the screen will remain
black.
4) Wait for the firmware to install into the Wi-Fi Action Camera
5) Once complete, the Wi-Fi Action Camera screen will display its welcome screen
6) To check if the firmware has been updated, go into the Setup Settings menu and check the
“Version”
NOTE: Please remember to remove the firmware file from your micro SD card to prevent the
firmware from flashing every time you restart your Wi-Fi Action Camera device.
FORMAT
The format setting option is used to erase all files inside your SD card, including protected
files. The format feature consists of the following options:
• Cancel
• Ok
PHOTO MODE SETTINGS
The Camera configures the Wi-Fi Action Camera’s photo snapshot settings. In the Photo
mode, press the “Menu” button to open up the Camera configuration menu.
The Camera settings consist of the following configuration options:
• Resolution
– Photo resolution configuration.
• Quality
– Picture quality configuration .
• Capture Mode
– Used to configure single or timed snapshots.
• Burst Mode
– Burst mode option.
