![background image](http://html.mh-extra.com/html/valore/true-wireless-earbuds-ii/true-wireless-earbuds-ii_manual_852140002.webp)
START USING THE WIRELESS EARBUDS
1) Charging the charging dock
a) Connect USB cable to the charging dock.
b) Red light will flash while charginging.
c) Once fully charged, red light will stay lit.
2) Charging the wireless earbuds
These earbuds have an internal rechargeable battery. The battery must be fully charged prior
to use. Earbuds cannot be used while charging.
a) Place earbuds into charging dock.
b) White lights around earbuds turns on while charging. When lights turns off, charging in complete.
c) Earbuds will switch on automatically when removed from charging dock.
3) Pairing both wireless earbuds (switched off)
Earbuds will connect to each other automatically. The left earbud is the default master.
Step 1: Activate Bluetooth function on your mobile device to begin pairing with earbuds.
Step 2: Remove earbuds from charging dock and wait for “left/right channel” voice prompt.
Step 3: The master earbud will flash blue and white lights alternately, it is ready to pair.
Step 4: Connect to the earbuds by selecting ‘Valore BTi38’ under the device list.
Step 4: Once connected, there will be a pairing voice prompt.
If the pairing is not successful, please turn off wireless earbuds first, and then re-pair again. After pairing is
successful, paired devices will remember each other. Unless pairing information is deleted because of new
pairing, no need to pair when using the next time.
If you want to pair the wireless earbuds with other devices, please turn off Bluetooth function of existing source
device, and pair the wireless earbuds with the new device according to steps 1-4 mentioned above.
4) Wireless earbuds controls
Listening to music
Play/Pause/Resume music - Short press multi-function button
Next song - Double press multi-function button
Activate/Stop Siri - Press and hold multi-function button on L or R earbud for 1 second
during standby or while playing music
Making and receiving calls
Answer a call - Short press multi-function button
End a call - Short press multi-function button
Reject incoming call - Double press multi-function button
Double press multi-function button to switch earbuds to phone and back from phone during a
call.