START USING THE WIRELESS EARBUDS
1) Charging
a) When the LED indicator connected earphone flash red with a voice “please charge”, put the
earbuds into the charging box. Otherwise the earphone will power off automatically.
b) If both the earbuds and charging box are out of power, insert the cable of the charger into
the Micro-USB port on the charging box and plug the charger into the AC socket. The
charging box and earbuds will be charged simultaneously.
c)The earbuds is charged through two metal contacts during charging in the box, and the
indicator blinks blue while charging. The full charge takes about two hours. The indicator goes
off when the earphone is fully charged. Then you can take out your earbuds for use.
When the charging box is being charged, the four indicators blink blue in sequence.
The full charge takes about two hours. The four indicators become steady blue when the
charging box is fully charged. Then you can disconnect the charger from the
socket and charging box.
2) Pairing both wireless earbuds (switched off)
Earbuds will connect to each other automatically. Otherwise, click the touch surface for 3
seconds to switch on manually. The master earbud’s indicator will flicker red and blue.
Step 1: Activate Bluetooth function on your mobile device to begin pairing with earbuds.
Step 2: Remove earbuds from charging box and wait for “left/right channel” voice prompt.
Step 3: Connect to the earbuds by selecting ‘Valore BTi42 under the device list.
Step 4: Once connected, there will be a pairing voice prompt.
Power on: Remove earbuds from charging case, it will turn on automatically.
Power off: Put earbuds back into charging case to power off automatically.
If the pairing is not successful, please turn off wireless earbuds first, and then re-pair again. After pairing is
successful, paired devices will remember each other. Unless pairing information is deleted because of new
pairing, no need to pair when using the next time.
If you want to pair the wireless earbuds with other devices, please turn off Bluetooth function of existing source
device, and pair the wireless earbuds with the new device according to steps 1-4 mentioned above.
