START USING THE WIRELESS SPEAKER
1) Charging the wireless speaker
Connect the USB charging cable to the speaker located on the base of the speaker.
Note: Please charge the speaker for at least 8 hours before first use. Please make sure that the speaker is
switched off when charging is in progress.
Light indication:
Pairing:
Blinking blue
Paired successful:
Solid blue
Micro SD card reader:
Solid red
Charging:
Solid red
Off
when full charged
2) Pairing the wireless speaker (switched off)
Step 1: Activate Bluetooth function on your mobile device to begin pairing with speaker.
Step 2: Press and hold onto the On/Off button located on the side of the speaker to turn on,
blue LED light will be blinking. The speaker now have entered pairing mode.
Step 3: Connect to the speaker by selecting ‘Valore NB23’ under the device list. Enter ‘0000’
for password if required.
Step 4: Once connected, the LED light at the Bluetooth button will be solid blue.
Note: If the pairing is not successful, please turn off wireless speaker first, and then re-pair again. After pairing
is successful, paired devices will remember each other. Unless pairing information is deleted because of new
pairing, no need to pair when using the next time.
If you want to pair the wireless speaker with other devices, please turn off Bluetooth function of existing source
device, and pair the wireless speaker with the new device according to steps 1-4 mentioned above.
3) Wireless speaker controls
On/Off button:
Press and hold for 2 seconds to switch on/off. When switched on, the speaker
will remember the mode you used the last time. Press and hold for 10
seconds to reset.
Mode switch (M) :
Press to change modes between Bluetooth/Micro SD card and Aux mode.
* Only use the Aux cable provided as it requries a Micro USB to 3.5mm cable
* To switch back to Bluetooth mode from Micro SD card mode, Press M.
Play/Pause/Call button :
In Bluetooth mode, click to play/pause music. Press and hold to
disconnect.
In Micro SD card mode, click to play/pause. Press and hold to
switch folder in Micro SD card.
In Aux mode, click to mute/play.
When phone rings, click to answer the call, press and hold to reject.
When answering the phone, press to hand up, press and hold to
switch to answer by mobile device.
