START USING THE WIRELESS SPEAKER
1) Charging the speaker
Make sure that the wireless speaker is turned off before charging. Plug the adapter cable into
the charging port located at the lower back of the wireless speaker and connect it to a wall
plug.
A red LED indicator will turn on when the speaker is charging. The red LED light will turn
off when speaker is fully charged. To fully charge the speaker, it will require at least 3 hours.
Note: Please charge the speaker for at least 8 hours before first use. Please make sure that the speaker is
switched off when charging is in progress.
2) Pairing the wireless speaker (switched off)
Step 1: Press and hold the On/Off button of the speaker until the blue LED light flashes
Step 2: Activate Bluetooth function on your mobile device to begin pairing with speaker.
Step 3: Connect to the speaker by selecting ‘Valore HR701’ under the device list.
Step 4: Once connected, the LED light at the Bluetooth button will indicate solid Blue.
Note: If the pairing is not successful, please turn off wireless speaker first, and then re-pair again. After pairing
is successful, paired devices will remember each other. Unless pairing information is deleted because of new
pairing, no need to pair when using the next time.
If you want to pair the wireless speaker with other devices, please turn off Bluetooth function of existing source
device, and pair the wireless speaker with the new device according to steps 1-4 mentioned above.
3) Re-pairing the wireless speaker
Each time the wireless speaker is turned on, it will attempt to connect to the last device it was
paired with automatically (mobile device with Bluetooth function turned on).
The wireless speaker will do as follows:
1. Connect to last connected devices automatically;
2. Be listed in the screen of devices as an output channel. Select ‘Valore HR701’ as the
output channel to play music.
Note: In some cases, the speaker may need to be manually selected from your operating system sound or
hardware output list.
4) Answering a phone call via the wireless speaker
Step 1: To pick up an incoming call, press the Hands-free button once to answer via the
wireless speaker.
Step 2: Press again to end a call.
Step 3: Press the volume buttons to adjust the volume of the call.
5) Connect via auxiliary cable
You may also connect to the wireless speaker via the provided auxiliary cable with your
mobile device to enjoy music of the same sound quality.