START USING THE 1080P CAR DVR
1) Charging
a) Connecting to the car charging
When the car starts, the camera automatically starts recording. When car engine is off, the
built-in battery will record for 1-2 mins as an emergency back up before switching off.
b) Connect the USB charging cable to the computer
2) Video Mode
Short press the power/OK button or when connected to the car charger, the camera will
automatically enter video mode. The red LED at the upper left of the screen flashes while
recording. Files will automatically be saved in TF card. Press power button and the red LED will
stop flashing.
3) Emergency lock
In video mode, short press mode to lock the current file. It will be saved as an SOS file which will
not be deleted during loop recording process.
4) Picture mode
Short press power/OK button to stop the video, then press mode to enter camera mode.
Short press power/OK button to take photos.
5) Browse and delete files
Double click mode button to enter playback mode. Press up/down button to choose playback
video and power/OK button to play.
To delete file, pause playback, press the menu button. Press down button to delete current or
delete all. Press power/OK to confirm action. Continue to press menu button to exit.
6) Menu function setting
Press menu button to enter settings interface. Press up/down button to select the specific
parameters and press power/OK button to confirm operation. When all settings are completed,
press menu button to exit setup interface.
6) USB mode
Connect USB cable to computer, press power/OK button. Camera will automatically pop up USB
menu with two modes to choose from.
Mass storage - Access video or photo files
PC-Camera - Real-time photo or video call
Full battery Slightly low battery low battery battery empty
