![background image](http://html2.mh-extra.com/html/valore/bts43/bts43_manual_3307311002.webp)
Press the ‘ON/OFF’ button for 3-5 seconds to turn on the speaker.
9 blinking indicator lights means that the speaker is currently not connected to any device, it will
enter pairing mode now.
II. PAIRING AND CONNECTING
III. CHARGING
IV. DOUBLE SPEAKER
1
Turn on the Bluetooth on your phone, search for Bluetooth device ‘0000’ and connect.
Upon successful connection, the speaker will give a prompt tone and the 9 indicator lights
will stay on.
Press the ‘ON/OFF’ button on both speakers, the indicator lights will start blinking and speakers
enter pairing mode.
1
Plug the USB-C charging cable into the charging port to charge.
During charging, the number of indicator lights reflects the charging progress.
The lights will be off once the speaker is fully charged.
2
The speaker will automatically turn off if it is not paired or connected to any device
after 3 minutes.
3
Press the ‘ON/OFF’ button for 3-5 seconds to turn off the speaker.
4
Note:
The above process is necessary to pair with the speaker for the first time. The speaker will automatically connect to the device it last
paired with from the second time onwards. This applies to both Android phones and iPhone.
Warning:
Please use DC 5V charger/adaptor to charge. Incompatible charger may cause hardware damage and other problems.
The indicator light will flash quickly to indicate low battery. If the speaker is not charged in time, it
will sound a few times then shut down automatically.