START USING THE WIRELESS SPEAKER WITH NIGHTLIGHT &
WIRLESS CHARGING FUNCTION
Operating the product
1. Plug the USB port of the USB cable to the power a daptor and the USB-C end to the
wireless charger.
2. After the product is powered on, the indicators flashes blue and white.
3. Place the wireless enabled device on the charging indication area. The white light turns
blue and stays on and enters the charging state.
Pairing the wireless speaker (switched off)
Step 1: Press play button for 3 seconds and there will be a beep sound.
(Bluetooth indicator light will be flashing)
Step 2: Activate Bluetooth function on your mobile device to begin pairing with earphones.
Step 3: Connect to the products by selecting ‘Valore BTS36’ under the device list.
Step 4: Once connected, the indicator light will stop flashing.
Note: If the pairing is not successful, please turn off wireless heaphones first, and then re-pair again. After
pairing is successful, paired devices will remember each other. Unless pairing information is deleted because of
new pairing, no need to pair when using the next time.
If you want to pair the wireless product with other devices, please turn off Bluetooth function of existing source
device, and pair the wireless product with the new device according to steps 1-4 mentioned above.
Light touch function
• Touch the first time to start the light at 10% brightness
• Touch again to change the intensity to 60% brightness
• Touch the third time to change the intensity to 100% brightness
• Touch the fourth time to turn off the light
