4) Pairing phone (manually) to power bank wireless speaker
• Turn on the speaker by pressing and hold for 3 seconds on the power button at the side, the
blue LED is it at the front speaker grille. You will hear a sweep tone indicates the speaker is
ready. For first time using the LED will be flashing fast to show that it now ready for pairing.
Browse your smart phone bluetooth device list, select the one named ‘Valore BTS449’ to
confirm pairing on your smart phone. You will hear a ‘bloop’ tone on the speakers which is
send from your phone. The speaker’s blue LED will lit continuously. Pairing is successful.
• When you need to disconnect the speaker, you first switch off bluetooth function on your
smart phone, the speaker’s blue LED will flash slowly. You then switch off the speaker by
pressing and holding onto the power button for 3-5 seconds, the pairing memory will be kept
there. Next time you turn on the speaker, it will connect to your smart phone automatically
when your bluetooth function is turned on less than 5m away.
• If you need to pair the power bank wireless speaker to a new device, turn off bluetooth
function on your old device first. Then power on your new device’s bluetooth function. Press
and hold onto the power switch for 1-2 seconds until the speaker’s blue LED is flashing fast
and repeat steps as above.
5) Call pick function
When the power bank wireless speaker is connect to your phone with the blue LED lit
continuously, whenever there is an incoming call, you can press the power button once to pick
up. Press the power button once again will call.
6) Speaker - How to use/Control
• Adjust volume - Operate from your smart phone/mobile device.
• Next/Previous track - Operate from your smart phone/mobile device.
•During music playback, press the power button once to pause, press again to resume.
If battery power becomes low, there will be some beeping alert sound during playback and
the speaker’s LED flashes red and blue quickly. Recharge the speaker as mentioned in the
above section.
Note: Music can still be played while recharging the in-builts batter
You can use the AUX-3.5mm audio cable to connect smart phone or other player devices for
music playback. Whenever you plug in the AUX cord, bluetooth will be disconnected. You will
then need to operate from the device connected.
Note: You will need to operate the smart phone to resume music playback when you disconnect the AUX cable
and use it wireless again, and operate the speaker buttons as usual.
