START USING THE WIRELESS EARBUDS
1) Charging
a) Charge the earbuds
Put the earbuds in the charging case to charge.When the earbuds are in a low battery state,
the red light flashes every 5 seconds
,
please put the earbuds into the charging case in time to
charge.
b) Charge the charging case
Recommended to use a standard charger and included charging cable to charge the
charging case. When the power of the charging case is low, the orange light flashes for l0
seconds and then turns off. Please charge the charging case in time.
2) Power on/off
Open the charging case and take out the earbuds, it will automatically turn on or long press
touch area for 3 seconds to power on.
Put the earbuds into the charging case, it will power off automatically or long press touch area
for 5 seconds to power off.
3) Pairing both wireless earbuds (switched off)
Earbuds will connect to each other automatically.
After the first connection, when opening again, it will connect to the last used device by
default.
Step 1: Activate Bluetooth function on your mobile device to begin pairing with earbuds.
Step 2: Remove earbuds from charging case and wait for earbuds to pair with each other.
Step 3: Connect to the earbuds by selecting ‘Valore BTi44” under the device list.
Step 4: Connection successful
If the pairing is not successful, please turn off wireless earbuds first, and then re-pair again. For subsequent
connection, when earbuds are removed from charging case, they will connect to device automatically. If you
want to pair the wireless earbuds with other devices, please turn off Bluetooth function of existing source
device, and pair the wireless earbuds with the new device according to steps 1-4 mentioned above.
4) Function description
Press and hold the left ear function key for 2 seconds Press and hold the left ear
function key for about 2 seconds again to turn off Siri
(this function needs to be supported by the mobile phone)
Answer/hang up:
Double-tap the function button
Press and hold the function button for 2seconds
Reject a call:
