①
LED indicator
②
Multi-functional button
③
Mode selection button (Android or iOS)
④
Lock nut
⑤
Micro USB charging port
⑥
ON/OFF button
⑦
Retractable handle
⑧
Mobile phone clamp
START USING THE WIRELESS SELFIE STICK
1) Charging the selfie stick
Connect your selfie stick to the USB adapter using the provided charging cable. The red LED
light will switch on when charging, then turn blue when the battery is fully charged.
2) Bluetooth pairing and connecting
Step 1: Switch the ON/OFF button to ON and the LED light will flashes Blue and Red rapidly.
Step 2: Activate Bluetooth function on your mobile device to begin pairing with selfie stick.
Step 3: Connect to the selfie stick by selecting ‘Valore-AC8810’ under the device list.
Step 4: Select either iOS or Android by pressing the Mode selection button in order to define
your compatible device.
Note: If the pairing is not successful, please turn off wireless selfie stick first and then re-pair
again. After pairing is successful, paired devices will remember each other. Unless pairing
information is deleted because of new pairing, no need to pair when using the next time.
If you want to pair the wireless selfie stick with other devices, please turn off Bluetooth
function of existing source device, and pair the wireless selfie stick with the new device
according to steps 1-4 mentioned above.
3) Re-pairing the wireless selfie stick
Each time the wireless selfie stick is turned on, it will attempt to connect to the last device it
was paired with automatically (mobile device with Bluetooth function turned on).
