Valor Retrofire RF24XBN Скачать руководство пользователя страница 19

19

Firebox Installation

Burner Module Reinstallation

Note: If the circulating fan is to be installed it 
should be done at this point before installing the 
burner module. See instructions packaged with the 
fan for details of the fan installation.

Reinstall the burner module using the 4 screws 
removed previously. 

Note:

 The upper baf

fl

 e may be removed to gain more 

room for the screwdriver to install the rear screws.

Leveling the 

fi

 rebox in the hearth

The backside of each support leg has a leveling bolt. If 
necessary, adjust the level of the 

fi

 rebox in the hearth.

Leveling

bolt

Front View

Side View

Fret bracket

Leg

Leveling bolt

Back

Front

Leveling

bolt

Gas Line Connection and Fire Unit Testing

Connect the gas line to the burner module. Check 
for leaks, purge the line, and test-

fi

 re the unit before 

installing the window or proceeding with the remainder 
of the install—see 

Lighting Instructions 

section.

Reinstall the Top Baf

fl

 e

 (if removed)

Reinstall Burner
Module (4 screws)

Edge Fits into
Cleat at Back

Remove Top Baffle
(2 screws)

Remove Top Baffle (optional)

(to provide space for a screwdriver)

Edge fits into 
Cleat at Back
of Firebox

Reinstall Top
Baffle (2 screws)

QUALIFIED 
INSTALLER

Содержание Retrofire RF24XBN































Отзывы: