2
Installation
1. Unhook the front trim from your stove.
2. Place the front trim on a fl at even surface rear side
up. The screen is to be installed between the front
trim plate and its lead-in brackets as indicated.
3. Mark the outline of lead-in brackets before
removing them. The screen frame will be placed
outside of these marks.
4. Remove the lead-ins and heat duct as one piece as
indicated (6 nuts).
5. Identify the back side of the barrier screen which
is its frame grooved face. The smooth face of the
frame will lie against the back of the front trim.
6. Place the screen against the back of the front trim
with the smooth face of its frame against the trim.
Align the screen so that its
frame is outside
of the
lead-in brackets marks added on step 3. Carefully
push the screen so that the studs of the trim pierce
the screen.
7. Replace the lead-in brackets and heat duct assem-
bly over the screen and fi x it in place with the nuts
removed earlier.
8. Hook back the front trim on the stove.
Grooved
side facing
fi replace
Lead-in
brackets
outline
marked in
step 3
Carefully press
screen against
studs to pierce
screen
Mark the corner
outline of the
lead-in brackets
