Valor Plus, Руководство пользователя, Страница: 9 / 36

SET TIMER
SET THE TIMER
You can program two heat cycles for diff erent times in
the day. Both cycles , P1 and P2 , have a start and
an end time. Cycles cannot overlap. Before you set
the timer, set the temperature.
1. Click SET button until TIMER appears.
2. Press SET button until time
6:00
fl ashes. P1 start
time appears.
3. To set the hour , press high fl ame
button. To set the minutes ,
press low fl ame button.
4. Click SET button so P1 end time
appears. Then, select time .
5. Click SET button so P2 start time
appears. Then, select time .
6. Click SET button so P2 end time
appears. Then, select time .
7. Press to save temperature
settings, or wait a few seconds.
Only want one heat cycle?
Set the
same
time for these three:
P1 , P2
and
P2
.