2
Installation
1. Insert the trim inside the appliance’s opening.
2. Secure the trim using the third (center) hole in the
frame (4 screws).
3. Place the cover plate in the space between the glass
and the trim. Align the round notch of the plate to
the hole in the support underneath as shown.
Note:
Each end of the plate has a rounded notch
opening to insert the hinge pin of the side doors.
Align notch in plate
with hole underneath
4. Identify the left-hand door according to the images
below.
5. Insert the top hinge pin into the upper hole behind
the frame.
6. Lower the bottom hinge pin into the bottom hole.
7. Repeat for the right-hand door.
Left Door
Top of door:
Longer hinge pin
Bottom of door:
Shorter hinge pin
Front
Rear
Insert hinge
pin here
hinge
pin
hinge pin
hinge pin
Insert hinge
pin here
Insert hinge
pin here
