Remote Control Operation
Automatic Standby Mode
If there is no transmission from the handset to the receiver within a 6-hour period, the appliance will go to
Standby
(pilot) mode.
Handset / Receiver Match
The remote control handset and receiver are programmed to function together. In case of a replacement of the handset
or the receiver, you will need to reset the receiver to allow them to function together. Contact your dealer for details
Low Battery Indication
Remote handset:
BATT
will appear on the display when
the battery needs to be replaced.
Replace with one 9 V
alkaline
battery.
Receiver:
Three short ‘beeps’ will sound when the motor
turns when the batteries need to be replaced. Replace with four 1.5 V
alkaline
batteries.
NOTE:
With very low battery, the valve shuts off the fire completely. This does not happen when the power supply is
interrupted.
CAUTION
DO NOT USE
a screwdriver or other metallic object
to remove the batteries from the battery box or the
handset! This could cause a short circuit.
Options
Venting (required)
See approved venting accessories listed below.
Inner Front (required)
See your dealer for your choice of Inner Fronts.
Outer Surrounds, Trims & Frets (optional)
See your dealer for your choice of Outer Surrounds
and Trims and Frets.
Optional Accessories
755CFK—Fan Kit
1265WSK—Wall Switch Control Kit
759EBL—Enamel Liner
754RSK—Rock Set Kit
760CBL—Ceramic Black Liners (fluted)
Conversion Kit (optional)
739PGK—Conversion Kit to Propane Gas
739NGK—Conversion Kit to Natural Gas
Hearth Gate (optional)
Hearth gates such as Kidco’s are available at retail
stores carrying safety products for children.
25
Содержание Legend 739ILN
Страница 27: ...Optional Wall Switch Kit 1265WSK Connector Red Yellow GV60 Wiring Diagram Wiring Diagram 27...
Страница 32: ......