2
Installation
1. Locate the trim inside the perimeter of appliance’s
opening and press it firmly against cement board or
the wall finish.
2. Secure the trim using 4 no. 8 screws.
3. Place the plinth in the space between the glass and
the trim. Align the round notch of the plinth to the
hole in support underneath as shown.
Note:
Each end of the plinth has a rounded notch
opening to insert the hinge pin of the side doors.
4. Identify the left-hand door according to the images
below.
5. Locate the top hinge pin into the upper hole behind
the frame.
6. Lower the bottom hinge pin into the bottom hole.
7. Repeat for the right-hand door.
fixing screws (4)
Align notch in plinth
with hole underneath
TOP of door:
this space is
wider
TOP of door:
tab at the rear
Left door
BOTTOM of door:
this space is
narrower
Rear view
Front view
Trim directly on the
fi
nished cement board
Flange below plinth is
visible when the trim is on
thicker wall finish
Trim on 5/8” thicker wall
fi
nish
Plinth
Opening in
the plinth
Insert hinge
pin here
hinge
pin
hinge pin
hinge pin
Insert hinge
pin here
Insert hinge
pin here
