2
Installation
1. Remove the existing top convection baffle supplied
with the heater and replace it with the convection
baffle supplied with this kit using the same screws.
Ensure the baffle offsets upwards.
2. Place the access panel horizontally under the screen
and insert the pins on each side of the frame
through the slots in the panel. Rotate the panel
downward.
3. Hook the Front Assembly to the four tabs inside
the appliance’s black frame.
Maintenance
To clean the metal of the front trim, use mild soap and
water. You can dust the screen with a soft brush. To
dust the inside of the screen, unhook the front.
If the barrier becomes damaged, the barrier shall
be replaced with the manufacturer’s barrier for this
appliance.
To clean the window and ceramics inside the firebox,
consult the
Owner’s Information
section of the
Installation and Owner’s Manual
supplied with the
fireplace.
1
2
3
4
#
Description
Part Number
1
Convection ba
ffl
e
4004636
2
Front assembly
4004629BY
3
Barrier screen
4004645
4
Access panel
4004635BY
Repair Parts List
Front
Back
534
Ba
ffl
e orientation—
side view
Front assembly
Rear view
Access panel
Designed and Manufactured by / for Miles Industries Ltd.
190 – 2255 Dollarton Highway, North Vancouver, B.C., CANADA V7H 3B1
Tel. 604-984-3496 Fax 604-984-0246
www.valorfireplaces.com
Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication.
WARNING
DO NOT TOUCH THE BARRIER SCREEN OR
FIREPLACE WHILE THEY ARE HOT! Let the
fireplace cool first before maintenance.
FOR YOUR SAFETY, ensure the barrier
screen is re-installed on the fireplace if it
has been removed.