
17
Thermocouple
probe must be
in flame
Correct
fl
ame appearance
534LSK—Traditional Logs
534RSK—Rocks
534DWK—Driftwood
Checking Pilot and Burner Flames
A periodic check of the pilot and burner
fl
ames should
be made. Check after the
fi
re has been on for at least
30 minutes. The pilot
fl
ame must cover the tip of the
thermocouple probe. The main burner
fl
ame pattern will
vary from appliance to appliance depending on the type
of installation and climatic conditions.
The appliance area must always be kept clear and
free from combustible materials, gasoline and other
fl
ammable vapors and liquids. Inspect the vent terminal
outdoors regularly to make sure that dirt, snow, insects,
leaves, shrubs, trees do not obstruct it. Examine the
whole vent system regularly. We recommend annually.
Rock fuel bed
A black discoloration may form over time at the front
bottom of the 6-rock original fuel bed; this deposit
can be burned o
ff
by running the
fi
replace on a low
to medium setting
fi
re for 30 to 45 minutes. This
discoloration is unavoidable and will re-form again.
Pilot Flame can be seen on the
left side of the fuel bed
Servicing & Maintenance
OWNER’S
INFORMATION
Содержание HORIZON H4 Series
Страница 56: ......