35
WARNING
The window unit must be correctly
installed, fastened and sealed after
servicing or serious bodily injury and/or
damage to the appliance may result.
To ensure a safe operation:
• Double-check that the window frame is
correctly installed;
• Verify that the spring-loaded bolts are
hooked properly to the window tabs then;
• Pull out the top of the window and release
it to make sure the springs return it;
repeat with the bottom of the window;
• Ensure the window is sealed before
operation.
WARNING
Failure to install the window correctly can:
• Leak carbon monoxide;
• Affect the performance of the fireplace;
• Damage components;
• Cause overheating resulting in dangerous
conditions.
Damages caused by incorrect window
installation is not covered by the Valor
warranty.
90
°
Installation
Refit & Check Window
Re
fi
t and Check Window
1. Insert the window inside the appliance case and rest
it on the
fi
rebox front bottom tabs.
2. While holding it, push in and screw the bottom two
spring-loaded bolts to secure them.
3. Insert the top two spring-loaded bolts pins into
the slot/holes and turn them 90 degrees to secure
them.
4. Hook the window ba
ffl
e to the top of the window
frame. Be careful not to hook it onto the
fi
rebox
frame—see images below.
5. Grab the top of the window and ba
ffl
e and pull
them forward and release to check that the window
opens slightly and returns con
fi
rming the good
function of the spring-loaded mechanism.
6. Similarly, check the bottom of the window by pulling
it forward and releasing it.
Window Ba
ffl
e
This side goes on top
of the window frame
and is hooked to it
This side covers the top front
of the window frame above the
glass & hides the bolts
fi
rebox frame
window
frame
window
ba
ffl
e
(appliance shown without its front frame for clarity)
Appliance front view
appliance top frame
window frame
cut out heat ba
ffl
e
(for clarity)
window ba
ffl
e
window ba
ffl
e