2
Installation
1. Identify the left and right panels using the image
below.
2. Identify the top and bottom of the left panel. The
notch in the rear
fl
ange of the panel is at the top.
The space between the rear
fl
ange and the edge of
the panel is wider at the top than at the bottom of
the panel as shown below.
3. Insert the top pin of the left panel in the hole at the
top of the left shroud already installed on the appli-
ance.
4. Lift the panel as far as possible and insert the bot-
tom pin in the hole at the bottom of the shroud. The
panel should rotate freely.
5. Install the right panel the same way.
TOP of door:
this space is
wider
TOP of door:
notch in the
rear flange
Left door panel
BOTTOM of door:
this space is
narrower
Rear view
Front view
6. Hook the barrier screen to the back of the front. Ori-
ent the screen so its tabs are on the back.
Note: The barrier screen, when hooked to the
trim, protrudes slightly in front of the trim.
7. Hook the front trim with the barrier screen to the
appliance’s shrouds.
Rear View
Screen tabs at the back
