background image

OWNER’S GUIDE

Page 5

  

Figure 1 Dimensions & clearances

DO

 

Provide a suitable guard that complies with BS 6539 or 6778 for the protection of

young children, the elderly and the infirm. Such a guard is also recommended for the
protection of pet animals. (Although this fire conforms to all the applicable standards, it
is a heating appliance and certain parts of its surface will become hot.)

Note: The guard supplied with the fire acts as a fireguard conforming to BS1945:1971
and satisfies the Heating Appliance (Fireguard) (Safety) Regulations 1991.

 

Wait three minutes before attempting to relight if the fire is switched off or the flames

are extinguished for any reason. (Your fire is fitted with a safety device that will
automatically shut off the gas supply to the fire if, for any reason, the flames go out.)

 

Get advice about the suitability of any wall covering near your fire. Soft wall

coverings (e.g. embossed vinyl, etc.) which have a raised pattern are easily affected by
heat. They may, therefore, scorch or become discoloured when close to a heating
appliance. Please bear this in mind whenever you are considering redecorating.

 

Provide a minimum side clearance as detailed in figure 1. Please bear this in mind if

ever you are considering altering the room.

 DON’T

H

 

Hang clothing, towels or any other fabrics over the fire.

H

 

Fill in the space behind the case.

H

 

Use the fire without the dress guard being in position.

H

 

Attempt to clean or service the fire off until it has been switched off and allowed to

cool completely.

H

 

Use the fire with damaged radiants.

APPLIANCE DIMENSIONS

Содержание Black Beauty Radiant 340










Отзывы: