OWNER GUIDE
Page 8
Aeration Control
This appliance is fitted with a control
which can be set to give a higher or
lower supply of air to the burner (See
6
in figure 2).
Maximum aeration is set by pushing
the lever into the lower position as
shown in figure 3.
Minimum aeration is set by slightly
lifting the lever allowing it to spring to
the minimum setting. See figure 3.
We recommend that the aeration
control is always set at the maximum
aeration for at least
the first 15 minutes
to allow the
appliance to
efficiently warm up.
The maximum
aeration setting is
also recommended
when using the
lowest heat setting
or to burn off any
carbon deposits
which may have
built up after
prolonged use at the minimum
aeration setting.
Figure 4 Remote control handset
Figure 3 Aeration control system
Figure 2 Appliance Manual Controls
