OWNER’S GUIDE
Page 11
Figure 11
Figure 10
Figure 9
Figure 8
Figure 7
4.
Place a type “A” coal between
the front and rear base coals with the
letter “A” upright and so that the
coal is against the left side of the
firebox. See figure 7.
5.
Place a type “B” coal
between the front and rear base
coals as shown in figure 8. The
letter “B” should be upright.
6.
Place a type “A” coal
between the front and rear base
coals with the letter “A” upright.
The top of the coal should rest
against the centre coal of the rear
base coal as shown in figure 9.
7.
Place the remaining type “B”
coal at the right side of the firebox
between the front and rear base
coals. The letter “B” should be
upright. The coal should touch the
right side of the firebox. See
figure 10.
8.
Place the remaining type
“A” coal between the front and
rear base coals. The letter “A”
should be upside down with its
rear face between the right and
centre coals of the rear base coal.
Angle the coal so that the gap
between it and the type “B” coal to
its right is appreciably larger than
the gap between it and the type “A”
coal to its left but do not have it
touching the type “A” coal. This
will give the best flame effect. See
figure 11.
