2
3. Place the rear
fi
ller panel on the glass retainer
against the rear
fi
rebox wall.
4. Place the rear glass panel, smooth side visible, on
top of the
fi
ller panel. Slide the panels behind the
left hand side panel.
5. Place the top panel on top of the left hand side and
rear panels.
6. On the top right side, rotate the brick anchor up and
out of the way and slide the side
fi
ller panel against
the
fi
rebox right side.
7. Place the right hand side glass panel, smooth side
visible, on top of the
fi
ller panel and rotate the an-
chor back down to hold the panels.
8. Tighten the side brick anchors on each side of the
fi
rebox.
9. Adjust the top panel so it rests on the two side pan-
els and the rear panels.
10. Reinstall the burner cover placing the rear end
fi
rst,
then dropping the front down. Secure with 2 screws.