2
2. Place the top left log on the pin of the rear log. The
bottom of the log rests against the left of the pilot
shield and slightly above.
3. Place the front left log on the burner. Slide it to the
left against the top left log. The narrow end should
rest in the notch in the rear log.
4. Place the front right log on the burner and slide it to
the left against the front left log.
5. Locate the top right log on the two pins on the right
side of the rear log. Ensure a tight fit against the flat
area around the pins in the rear log.
6. Place the lower end of the center right log onto the
pin on the front right log. Rest the narrow end in the
notch into the rear log.
7. Pour some ceramic loose
coals on each side of the
logs to hide the sheet metal
work.
Do NOT put any coal
into the pilot area.
Pilot area
Pilot area
Notch in rear log
Pin in front right log
