6666
REFITTING THE COALS & CERAMIC WALLS
If the coals or ceramic walls are dislodged or removed, refit them as follows:
Only the parts supplied with this appliance or authorised Valor replacements must be used. Never
add extra coals above the number stated in this guide.
1
With its feather edge at the top, place the ceramic rear wall into the channel at the back of
the fire box.. Push the wall flat against the rear of the fire box. (See figure 5) .
2
Place the two halves of the front base coal in the burner
compartment so that they rest on the ledges at the sides and
front. Pull the coals forward so that they are immediately behind
the front rim of the burner compartment (See figure 6).
3
Place the rear base coal in the burner compartment behind
the front coal. It should rest on the ledge at the back of the
burner compartment and its rear face should touch the rear
ceramic wall (See figure 7).
4
The ceramic side walls are marked at the rear bottom
corners “L” (Left side) & “R” (Right side). Place the side walls
against the sides of the fire box and in the recesses at the sides of
the base coals. The markings “L” & “R” should be at the at the
back bottom corners and facing to the centre of the back of the
firebox (See figure 8).
Figure 8 Ceramic side walls
installation
Figure 7 Rear base coal
installation
Figure 6 Front coal installation
Figure 5 Ceramic rear wall
installation