12
-
Before you assemble the connection, you must make sure the hose is not damaged with
soapy
water or leakage fluids.
-
Do not use a naked flame to check
for
gas leakage
s
.
-
All metal items that are used during gas connection must be free from rust, and check the
expiry date of any
components
used for connection
s
.
What to check during fixed gas connection assembly
When it comes to assembling a fixed gas connection, be aware that there is a different method
used in different areas. The most common parts are supplied with your appliance, but any other
part can be supplied as a spare part.
-
During connection, always keep the nut on the gas manifold fixed, whilst rotating the counter-
part.
-
Use the correct sized spanners to ensure a secure and safe connection.
-
Always use the seals provided in the spare set for all the surfaces between different
components, and these seals must have been approved to be used in gas connections.
-
Do not use plumbing seals for gas connections.
Remember that this appliance is prepared to be connected to
the
gas supply in the country
for which it has been produced. The main country of destination is marked on the rear
cover of the appliance. If you need to use it in another country, any of the connections in
the figure below can be required. In such a case,
learn the appropriate connection parts
and obtain those parts to perform a safe connection
.
You must call a qualified and certified registered gas fitter to connect the gas to the
appliance for you so that it's done safely, appropriately and in compliance with safety
standards.
WARNING: Do not use any match or lighter to control a gas leak.
Adapter
Gas Pipe
Gas Pipe
Gas Pipe
Gas Pipe
Seal
Seal
Seal
Hose
Fitting
Gas Hose
with Collar
Mechanical
Gas Hose
Mechanical
Gas Hose
Mechanical
Gas Hose
