Valor 1500KP Скачать руководство пользователя страница 4

4

This manual contains very important information about the safe operation and maintenance of your 

fi

 replace. 

Read and understand all instructions carefully before operating your 

fi

 replace. Failure to follow these 

instructions may result in possible 

fi

 re hazard and will void the warranty.

Replacement manuals are available by contacting Valor Customer Service at 1-800-468-2567, or by visiting 

valor

fi

 replaces.com

.

 

WARNING: Extremely Hot!

Heat and 

fl

 ammability

• Some parts of your 

fi

 replace are extremely hot, 

particularly the glass window.  Use the  provided bar-

rier screen and a  gate to reduce the  risk of severe 

burns.

• The glass windows can exceed temperatures of 

500°F at full capacity.

• Always keep the appliance clear and free from com-

bustible materials, gasoline, and other 

fl

 ammable 

vapors and liquids. 

• Be aware of hot wall surfaces. The wall directly 

above the 

fi

 replace can get very hot when the 

fi

 re-

place heats. Although safe, it may reach tempera-

tures in excess of 200º F depending on choice of 

trims or optional accessories. Do not touch!  

• Be aware of hot surfaces in front of the 

fi

 replace 

windows. A shelf directly in front of the 

fi

 replace 

can get very hot when the 

fi

 replace heats. Although 

safe, they may reach temperatures in excess of 200º 

F depending on elevation of the shelf. Do not place 

anything on it.

• Some materials or items, although safe, may dis-

color, shrink, warp, crack, or peel due to the heat 

produced by the 

fi

 replace. Avoid placing candles, 

paintings, photos and other combustible objects 

sensitive to heat or furniture within 36 inches 

(0.9 m) around the 

fi

 replace.

• Due to its high temperature, the appliance should 

be located away from high-tra

  c areas, furniture, 

and draperies.

• Clothing or 

fl

 ammable material should not be 

placed on or near the appliance.

Glass window

• The glass window fronts must be in place and 

sealed before the unit can be placed into safe op-

eration.

• The glass fronts must only be replaced as complete 

units, as supplied by the 

fi

 replace manufacturer. No 

substitute material may be used.

• Do not use abrasive cleaners on the glass front 

assembly. Do not attempt to clean the glass front 

when it is hot.

• Do not strike or slam the glass fronts.

Safety and your fireplace

WARNING

Do not operate this appliance with 

the glass fronts removed, cracked, or 

broken. Replacement of the glass fronts 

should be performed by a licensed or 

quali

fi

 ed service person.

Do not put

 

furniture or other objects 

in this space in front of 

the fireplace:

36” (0.9 m)

Fireplace

Hearth

Содержание 1500KP































Отзывы: