Valor Fitness
______________________________________________________________________________
____________________________________________________________________________________________________________________________________________________________
www.ValorFitness.com
3450 Morris Street North, St. Petersburg, Florida 33704
Phone: (727) 895-9525
Fax: (727) 895-9502
E-mail: [email protected]
8.
Insert
parts #16 Storage Pegs
into the main frame and tighten with
parts #1 M10 x 20 Bolt
and Washers.
9.
Insert part
#4 Lock catch
in the top part of the main uprights just below the Cap that was
placed on earlier. These lock catches are a safety feature in case the Popper Pin is not
securely in place.
From this point forward, if there are any plastic parts that were not attached at the factory, then locate
the part on the diagram and where it will be placed on the unit.
Please call 727-895-9525
if you have
any questions or if you come across a difficult section during the assembly process. If you would like
to rate our Assembly Instructions once you are finished, the please send your comments to myself at
.
Rating
A = Very well done.
B = Pretty Good.
C = Fair.
D = Seriously.
F = Find Another Occupation.
Thanks,
Jim Vanderbleek
President, Valor Fitness
