Valor Fires 834, Инструкция для установщика и владельца, Страница: 12 / 20

2. The bottom of the fascia
has a bracket with two holes.
Secure the bottom of the
fascia to the heater using the
two knurled shoulder screws
supplied (See figure 8).
Fitting the Fuel support (All models).
Before fitting the fuel support ensure that the back page of this guide is
completed.
1. Locate the fuel support as in figure 9.
2. Place the coals / pebbles on top of the fuel
support. It is not necessary to use all the coals /
pebbles supplied.
Important notes.
!
The coal pieces supplied are a natural material.
Occasionally it will be necessary to reduce the size
of the coal pieces. To do this place them inside a
plastic bag, place on a suitable hard surface and tap
gently with a small hammer or similar tool.
!
The coals / pebbles are for decorative
purposes only. There is a choke risk to young
children. Make sure they cannot gain access to
them.
Page 12
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2007.
Figure 9. Fuel support
locations (Fascia may differ
from that shown)
Figure 8. Securing the Distinction 2 fascia