5. PACK CONTENTS
1
Burner and hotbox unit.
1
Spacing frame (Three separate pieces).
6
Edge clips for securing the spacing frame.
1
Inlet ‘T’ Connector which includes a nut
and olive for 8mm inlet pipe.
1
Flue restrictor plate.
2
Screws (For flue restrictor).
2
Fireback spacing brackets.
2
Screws (For fireback spacing brackets).
2
Small “U” seals for hotbox side flanges.
1
Strip of floor sealing tape.
4
Eyebolts.
Carefully remove all the contents. Check that all the listed parts are present and in
good condition. The pack may contain additional components to that stated above.
These can be discarded following installation.
Page 18
©
Baxi Heating U.K. Limited 2010.
Figure 8. Pack contents
1
Length of foam seal.
6
Fibre plugs.
4
Woodscrews.
2
Fire retaining cables.
2
Cable clamps.
1
Rubber grommet.
1
Literature pack (Not shown).
1
Smoke match tube.
1
Fascia.
1
Elliptical burner bezel.
1
Fascia heat baffle.
4
Screws for fascia heat baffle.
INSTALLER GUIDE
